Vanguard Security Corporation - DIYalarms.net
Honeywell Security Products Dealer
Glassbreak Sensors
Acoustic Glassbreak sensors, usually mounted on ceilings or walls,
work by "listening" for the sound of breaking glass in a window.  
"Shock" glassbreak detectors are mounted on the window and "feel"
technology can provide shatter and shock protection for your windows,
for often intruders are "sensed" and an alarm sounded while they are
still outdoors. This is often enough to send a burglar running!

FG-1625 Glassbreak Detector
Code
Price:
The new FG-1625 Glassbreak Detector uses the latest technology
to provide faster response and increased false alarm immunity. The
FG-1625 is specifically designed to allow fast, easy installation, while
the adjustable sensitivity settings can compensate for the acoustics
FG-701 Glassbreak Simulator


FlexCoreTM Signal Processor
The FlexCore Signal Processor is an Application-Specific Integrated
Circuit (ASIC), which processes sound data in parallel rather than
sequentially for faster, more accurate detection decisions. The
combination of proven FlexGuard® performance with the speed of
FlexCore processing provides unmatched false alarm immunity
without compromising detection.

Easy Installation and Setup
IntelliSense’s patented technology allows remote activation of Test
Mode (with simulator). The FG-1625 has a centered wire entry hole,
45° terminal blocks, and EOL terminals. A hand-clap feature verifies
that the detector is functioning.

Selectable Sensitivity
Two dip switches on the FG-1625 make it easy to set the sensitivity
to match the acoustics of the room. Four different sensitivity levels
are available, ranging from very low to high. The range can then be
verified remotely with the FlexGuard FG-701 Glassbreak Simulator.

Mount the Detector Anywhere
Mounts on any wall, in the window frame, or on the ceiling, with no
minimum range and a maximum range of 25’ (7.6 m) to the glass.

Covers All Glass Types
The FG-1625 works on all glass types, including plate, tempered,
laminated, wired, film-coated, and sealed insulating glass.

Multiple Domain Signal Analysis
The FG-1625 performs Multiple Domain Signal Analysis in which
time, frequency and amplitude characteristics are evaluated for
signal qualification. This enables the detector to accurately
discriminate false alarms from true glassbreak events.

Enclosed PC Board
The PCB is protected from potential damage during installation.

Patented Remote Test Mode
The Patented Remote Test Mode can enabled or disable the
indicator LEDs using the FG-701Glassbreak Simulator. The unit
automatically resets from Test Mode in five minutes.

Mounting Locations
The FG-1625 can be mounted on the ceiling, opposite wall,
adjoining wall, or the same wall as the glass.


Install Sheet

Vanguard Security Corporation
Your Wireless Home Security System Experts